⟁ Florida Well Data field records · 2026 survey

Florida Well Data › Pinellas County › Saint Petersburg (33729)

Saint Petersburg, FL (33729): well depth, water level & drilling cost

✓ 741 FL WMD/county records · Pinellas County

20 ftmedian well depth
14 ft–30 fttypical depth range
6 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Saint Petersburg (33729) address — $49

How deep are wells in and around Saint Petersburg (33729), Florida?

The median drilled well depth in and around Saint Petersburg (33729) is 20 ft, based on 687 wells with recorded depths in the state FL WMD/county database. Half fall between 14 ft and 30 ft; 90% are shallower than 120 ft.

How much does it cost to drill a well in and around Saint Petersburg (33729)?

Applying published per-foot rates to the local median depth of 20 ft: drilling and casing alone typically runs $500–$1,300; a complete system including pump, pressure tank, and hookup typically runs $1,200–$2,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Saint Petersburg (33729)?

The median static water level is 6 ft below ground surface (middle half of wells: 4 ft–10 ft), from 383 measurements.

Drilled depth distribution

0–50 ft 568 50–100 ft 23 100–150 ft 64 150–200 ft 24 200–300 ft 8 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Saint Petersburg (33729)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Saint Petersburg (33729)

Free. Goes to licensed drillers working Pinellas County.

Part of Pinellas County well records.

Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.