Florida Well Data › Hillsborough County › Tampa (33646)
Tampa, FL (33646): well depth, water level & drilling cost
✓ 542 FL WMD/county records · Hillsborough County
Pull every recorded well near a Tampa (33646) address — $49
How deep are wells in and around Tampa (33646), Florida?
The median drilled well depth in and around Tampa (33646) is 125 ft, based on 519 wells with recorded depths in the state FL WMD/county database. Half fall between 21 ft and 233 ft; 90% are shallower than 280 ft.
How much does it cost to drill a well in and around Tampa (33646)?
Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Tampa (33646)?
The median static water level is 8 ft below ground surface (middle half of wells: 5 ft–13 ft), from 383 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hillsborough County.
Part of Hillsborough County well records.
Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.