⟁ Florida Well Data field records · 2026 survey

Florida Well Data › Hillsborough County › Crystal Springs (33524)

Crystal Springs, FL (33524): well depth, water level & drilling cost

✓ 1,042 FL WMD/county records · Hillsborough County

32 ftmedian well depth
12 ft–100 fttypical depth range
8 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Crystal Springs (33524) address — $49

How deep are wells in and around Crystal Springs (33524), Florida?

The median drilled well depth in and around Crystal Springs (33524) is 32 ft, based on 956 wells with recorded depths in the state FL WMD/county database. Half fall between 12 ft and 100 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Crystal Springs (33524)?

Applying published per-foot rates to the local median depth of 32 ft: drilling and casing alone typically runs $800–$2,080; a complete system including pump, pressure tank, and hookup typically runs $1,920–$3,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Crystal Springs (33524)?

The median static water level is 8 ft below ground surface (middle half of wells: 5 ft–12 ft), from 614 measurements.

Drilled depth distribution

0–50 ft 514 50–100 ft 184 100–150 ft 151 150–200 ft 44 200–300 ft 38 300–400 ft 12 400–600 ft 8 600+ ft 5
Looking at a specific property in Crystal Springs (33524)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Crystal Springs (33524)

Free. Goes to licensed drillers working Hillsborough County.

Part of Hillsborough County well records.

Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.