Florida Well Data › Calhoun County › Clarksville (32430)
Clarksville, FL (32430): well depth, water level & drilling cost
✓ 554 FL WMD/county records · Calhoun County
Pull every recorded well near a Clarksville (32430) address — $49
How deep are wells in and around Clarksville (32430), Florida?
The median drilled well depth in and around Clarksville (32430) is 160 ft, based on 541 wells with recorded depths in the state FL WMD/county database. Half fall between 100 ft and 200 ft; 90% are shallower than 220 ft.
How much does it cost to drill a well in and around Clarksville (32430)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Clarksville (32430)?
The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–40 ft), from 391 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Calhoun County.
Part of Calhoun County well records.
Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.