⟁ Florida Well Data field records · 2026 survey

Florida Well Data › Baker County › Glen Saint Mary (32040)

Glen Saint Mary, FL (32040): well depth, water level & drilling cost

✓ 1,132 FL WMD/county records · Baker County

130 ftmedian well depth
100 ft–166 fttypical depth range
20 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Glen Saint Mary (32040) address — $49

How deep are wells in and around Glen Saint Mary (32040), Florida?

The median drilled well depth in and around Glen Saint Mary (32040) is 130 ft, based on 1,102 wells with recorded depths in the state FL WMD/county database. Half fall between 100 ft and 166 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Glen Saint Mary (32040)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Glen Saint Mary (32040)?

The median static water level is 20 ft below ground surface (middle half of wells: 14 ft–27 ft), from 950 measurements.

Drilled depth distribution

0–50 ft 43 50–100 ft 178 100–150 ft 465 150–200 ft 259 200–300 ft 145 300–400 ft 1 400–600 ft 5 600+ ft 6
Looking at a specific property in Glen Saint Mary (32040)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Glen Saint Mary (32040)

Free. Goes to licensed drillers working Baker County.

Part of Baker County well records.

Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.