Florida Well Data › Bradford County
Bradford County, Florida: well depth, water level & drilling cost
✓ 203 FL WMD/county records · verified 2026-06-30
How deep are wells in Bradford County, Florida?
The median drilled well depth in Bradford County is 165 ft, based on 185 wells with recorded depths in the state FL WMD/county database. Half of all wells fall between 42 ft and 235 ft; 90% are shallower than 279 ft. Wells drilled since 2016 have a median depth of 245 ft.
How much does it cost to drill a well in Bradford County?
Applying published per-foot rates to the local median depth of 245 ft: drilling and casing alone typically runs $6,125–$15,925; a complete system including pump, pressure tank, and hookup typically runs $14,700–$24,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bradford County?
The median static water level is 59 ft below ground surface (middle half of wells: 25 ft–78 ft), from 138 measurements.
How much water do wells in Bradford County produce?
Few pump tests are recorded for this county.
Pull every recorded well near a Bradford County address — $19
Drilled depth distribution
Who drills wells in Bradford County?
Companies by number of wells permitted in this county since 2016, per public water-management-district and county well-permit records.
| Driller | Wells since 2016 |
|---|---|
| Jeffrey K Stillson | 2 |
| Shawn Dowdy | 1 |
| TONY FUSCOE | 1 |
| Loyd Plaisted | 1 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Method: medians computed from FL WMD/county records (public well records aggregated from Florida water-management districts + county programs (well-use codes vary by source, so all filed wells are included); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.